Change Currency: USD EUR

Change Language: English (UK) Dutch

ATTiny board build

€14.95

This product is currently out of stock

Product Information

Product Information

This is a low cost programmer/project board that makes you able to program your microcontroller via the parallel or serial port of your PC and build your own micro-controller projects. The board supports most of the ATTiny microcontrollers. It has two sockects, one for the DIP8 Tiny microcontrollers and one for the DIP20 Tiny microcontrollers. The board has a 5VDC voltage regulator that can deliver 1000mA. A battery pack or a wall wart can be used as a power supply for the board. The I/O ports of the micro-controller are available on two 10 pin headers. The microcontroller on the board can be programmed via the standard 10pin AVR ISP programming interface connector. You can hook up the connector to the parallel port or serial port of your PC with the parallel port or serial port programming cable(not included). With free downloadable software like PonyProg2000 or AVR-BASCOM you can program the device on the board. With the reset button on the board you can reset the microcontroller. This product is delivered with a normal IC socket for the microcontroller. (Microcontroller included)

Supported AVR micro-controllers:

DIP-8p Tiny

  • ATTiny12
  • ATTiny13
  • ATTiny15
  • ATTiny25
  • ATTiny28
  • ATTiny45
  • ATTiny85
    DIP-20p ATTiny
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  • ATTiny2313
  • AT90S2313
  • AT90S1200

Features:

  • Dimensions : 65mm x 48mm
  • Power supply : 10 - 15 VDC
  • Power Consumption max : 1000mA
  • AVR SP12 10pin programming interface connector
  • Programmable with the parallel port or serial port of your PC
  • Microcontroller I/O ports available on pin headers.
  • 4Mhz ceramic resonator for the clock source
  • Connector for DC plug 35 x 1.1 mm
  • Reset button

Documentation

Compiling and Programming Tools

NOTE!

  • The board delivered is without microcontroller (sold separately}
  • To program the device on the project board you also need the AVR ISP parallel port programming cable and a power supply

Product Code: ATTBLD

 

©2015 www.bizztronix.eu - All rights reserved.

eCommerce by CubeCart